Skip to main content
Scientific Parameter intermediate

How Close Is a Calculated Water Activity to the Lab? A Ganache Pilot

Eleven ganaches with published lab water activity, run through the Formul.io calculator: from the recipe as written it reads about 0.03 high, and given the finished ganache's moisture, 8 of 11 land within 0.025 of the lab.

Yauheni Padniuk 10 min read Updated November 17, 2026
Small sample cups of chocolate ganache beside a bowl, spatula, notebook and calculator

The calculator counts the water that went into the bowl; the lab measures the finished ganache. We compared the two on eleven published ganaches. From the recipe as written, the calculation reads above the lab on 9 of the 11, by 0.03 on average: with typical ingredients those recipes hold more water than the labs later found in the finished ganache. Given the finished ganache’s moisture, which the lab measured, 8 of the 11 calculations land within 0.025 of the lab.

Reading above the lab is the cautious error, since a higher water activity means a shorter shelf-life estimate. But the labs measured two ganaches above 0.85, where the calculator warns of a high spoilage risk: 0.92 and 0.88. From their recipes both calculate above 0.85 too, but below the lab, at 0.892 and 0.859. And at its finished moisture the white chocolate ganache calculates 0.803, below the line, although its lab read 0.88. So if your calculation lands within a few hundredths of 0.85, have the finished ganache tested.

This is a pilot: eleven samples from three studies that published the recipe, the meter reading and the moisture under an open licence — a dark chocolate filling, nine ganaches made with compound chocolate (a coating in which vegetable fat replaces some or all of the cocoa butter) and a white chocolate ganache. One lab measured each sample once, so the comparison does not prove that every calculated aw is accurate.

Calculated Against Measured

From the recipe, the calculation reads above the lab in 9 of 11. Given the finished ganache's moisture, 8 of 11 land within 0.025 of the lab
Calculated from the recipe Calculated at the finished ganache's moisture Within ±0.025 of the lab Lab above 0.85: high spoilage risk
Lab Dark chocolate 70 %, cream 33 %: Lab 0.92; Calculated from the recipe 0.892 (−0.028); Calculated at the finished ganache's moisture 0.942 (+0.022) Dark chocolate 70 %, cream 33 % 0.92 Dark compound, butter: Lab 0.7925; Calculated from the recipe 0.856 (+0.064); Calculated at the finished ganache's moisture 0.833 (+0.040) Dark compound, butter 0.793 Dark compound, 70 % palm oil: Lab 0.7989; Calculated from the recipe 0.850 (+0.051); Calculated at the finished ganache's moisture 0.823 (+0.024) Dark compound, 70 % palm oil 0.799 Dark compound, palm oil: Lab 0.7949; Calculated from the recipe 0.847 (+0.052); Calculated at the finished ganache's moisture 0.831 (+0.036) Dark compound, palm oil 0.795 Milk compound, butter: Lab 0.8172; Calculated from the recipe 0.852 (+0.035); Calculated at the finished ganache's moisture 0.808 (−0.009) Milk compound, butter 0.817 Milk compound, 70 % palm oil: Lab 0.8053; Calculated from the recipe 0.846 (+0.041); Calculated at the finished ganache's moisture 0.807 (+0.002) Milk compound, 70 % palm oil 0.805 Milk compound, palm oil: Lab 0.8131; Calculated from the recipe 0.843 (+0.030); Calculated at the finished ganache's moisture 0.799 (−0.014) Milk compound, palm oil 0.813 White compound, butter: Lab 0.7931; Calculated from the recipe 0.846 (+0.053); Calculated at the finished ganache's moisture 0.773 (−0.020) White compound, butter 0.793 White compound, 70 % palm oil: Lab 0.8169; Calculated from the recipe 0.840 (+0.023); Calculated at the finished ganache's moisture 0.811 (−0.006) White compound, 70 % palm oil 0.817 White compound, palm oil: Lab 0.8208; Calculated from the recipe 0.838 (+0.017); Calculated at the finished ganache's moisture 0.813 (−0.008) White compound, palm oil 0.821 White chocolate, butter: Lab 0.88; Calculated from the recipe 0.859 (−0.021); Calculated at the finished ganache's moisture 0.803 (−0.077) White chocolate, butter 0.88 −0.050+0.05 ← calculation lower calculation higher →

The middle of the chart is the lab’s value, which is also printed at the right of each row. The further a mark sits from the middle, the further the calculation is from the lab: to the right it reads higher, to the left lower. The line shows how far the calculation moves when it uses the finished ganache’s moisture instead of the recipe.

Why the Recipe and the Lab Disagree

In the same recipe, less water means a lower water activity. The calculator works from the recipe it is given, so it counts the water that went into the bowl. When some of that water leaves the pan, the finished ganache holds less water, and has a lower water activity, than its recipe suggests.

In ten of the eleven samples, the recipes as written hold 22.0–23.6 % water with typical ingredients, while the labs measured 16.6–20.9 % in the finished ganache. Some water may have evaporated while the cream was heated, or the ingredients held less water than typical ones; the studies do not say which. At the finished ganache’s moisture, the six milk and white compound ganaches land between 0.002 above the lab and 0.020 below it. Five of the six read below it, the less cautious side: the calculator counts the salts milk carries dissolved, which lower a milk or white ganache’s calculation by about 0.01 (the milk’s own salts).

The dark chocolate filling goes the other way. Its stated 2:1 ratio of chocolate to cream holds 20.4 % water, but the lab measured 31.7 %, which fits a mix with more cream. From the stated ratio it calculates 0.892 against the lab’s 0.92; at the finished moisture, 0.942.

Three dark compound ganaches stay high. Even at the finished moisture they read 0.024 to 0.041 above the lab. The nine compound recipes differ only in the chocolate and the fat, and the real composition of the dark compound chocolate is unknown, so it could move the result either way.

The white chocolate ganache reads low. At its finished moisture of 17.5 % it calculates 0.803 against the lab’s 0.88, the largest gap in the comparison. From its recipe as written it calculates 0.859, closer to the lab: it is the one sample where entering the measured moisture moves the calculation away from the lab. A white compound ganache with butter from another study has a similar recipe, with compound chocolate in place of couverture, and a similar moisture, 16.6 %, yet its lab read 0.79. The calculation separates the two by about 0.03 and the labs by 0.09. The rest may lie in the chocolate, the cream or the measurements themselves, and the studies do not show which.

A few points of water can move a calculation across 0.85

Above 0.85, the calculator flags a high spoilage risk. The labs measured the nine compound ganaches at 0.79–0.82, below the line. At their finished moisture all nine calculate below 0.85 too; from the recipes as written, two land just above it, one on it and six just below. The white chocolate ganache goes the other way: its lab read 0.88, and its recipe calculates above 0.85 as well, at 0.859, but at its finished moisture it calculates 0.803, below the line.

What This Means for You

  • Weigh the batch before and after cooking. Weighed in the same pan, the weight it loses is almost all evaporated water. Add a Dry step to the recipe’s process after the step you weighed and enter how much water the mix still holds, so the calculator starts from the ganache you actually made. For example, a 500 g batch holding 150 g of water that comes off the heat at 480 g holds 130 g of water: 27 % of its weight.
  • Near 0.85, test the finished product. Use the calculation to develop a recipe and compare versions. If your result lands within a few hundredths of 0.85, or you need to back a shelf-life claim, have a lab measure the finished ganache, ask it to report the moisture too, and run a storage test. Correcting for moisture lowers the calculation, and near 0.85 is where it missed most in this comparison: 0.803 for the white chocolate ganache against its lab’s 0.88.
  • Send us your lab result. We compare it with the calculation free of charge, and each confectionery or dessert recipe you send earns a month of Pro, up to three. The conditions are below.

Send Us Your Lab Result

Send a lab result, get a month of Pro

We compare your lab result with the calculation free of charge, and you get one month of Pro for each recipe, for up to three recipes. Send to [email protected]:

  • a confectionery or dessert recipe in grams: ganache or another filling, caramel, pâte de fruit, gelato, mousse, nougat…;
  • its lab report, as a PDF or a photo, showing the water activity, the lab’s name and the date, and the meter and the measuring temperature if it gives them;
  • the moisture or dry matter, if the lab measured it: it makes the comparison more precise but is not required.

With your consent, we add the result to this comparison without names. Nothing is published without consent, and names never are.

How We Compared, for Technologists

This part is for readers who want to check the comparison: the studies, the inputs, the full results and the limits of eleven samples.

The Three Studies

Panda et al. 2022 tested high-pressure processing as a way to keep chocolate fillings for 12 months. Its filling is Apamate 70 % dark chocolate from Chocolates El Rey and cream with 33 % fat, described as mixed “in a 2:1 proportion”; the cream was heated to 90 °C before the chocolate was blended in. Water activity was read on a portable Rotronic Hygropalm HP23-A at 20 ± 1 °C in five replicates, and moisture by drying.

Fadzil et al. 2025 made nine ganaches from dark, milk and white compound chocolate. Each holds 49 % compound chocolate, 35 % whipped cream and 7 % inverted sugar, with 9 % fat as butter, a 70:30 mix of palm oil and butter, or palm oil alone. Cream and inverted sugar were heated to 80 °C before the chocolate went in. Water activity was read on an Aqualab meter at about 25 °C in triplicate, and moisture by drying.

Pamungkaningtyas et al. 2024 added butterfly pea and roselle flower powders to a white chocolate ganache of 49 % white chocolate couverture, 34.9 % whipped cream, 9 % unsalted butter, 7 % inverted sugar and 0.1 % carrageenan, with the cream and inverted sugar heated to 45 °C. Water activity was read on an Aqualab meter at 25 °C in triplicate, and moisture by oven drying at 105 °C; the study prints both results on its charts, water activity to two decimals. Only the control without flower powder is compared here, because the study does not report what the powders contain.

What the Calculator Was Given

None of the studies reports the composition of its ingredients, so the calculator was given typical values. For the compound chocolates these are mid-range formulations of the vegetable-fat (lauric) compound coatings sold for confectionery, not the products the study used. The white chocolate ganache study names only “whipped cream”, so the calculation assumes a dairy cream with 35 % fat.

IngredientTypical composition used
Dark chocolate filling, Panda et al. 2022
Dark chocolate, 70 % cocoa 0.5 % water, 40 % fat (cocoa butter), 29.5 % sucrose, 8 % protein, 9 % fibre
Cream, 33 % fat 60.2 % water, 33 % fat, 3.4 % milk sugar, 2.4 % protein
Compound chocolate ganaches, Fadzil et al. 2025
Compound chocolate, dark 52.3 % sucrose, 30.9 % vegetable fat, 14.0 % cocoa powder (11 % fat), 2.5 % skimmed milk powder, 0.3 % lecithin
Compound chocolate, milk 47.6 % sucrose, 32.1 % vegetable fat, 7.5 % cocoa powder (11 % fat), 12.5 % skimmed milk powder, 0.3 % lecithin
Compound chocolate, white 50.8 % sucrose, 31.9 % vegetable fat, 16.9 % skimmed milk powder, 0.3 % lecithin
Whipped cream 35 % fat, 58.2 % water
Inverted sugar 81 % dry matter, half glucose and half fructose
Butter / palm oil Butter 82 % fat, 16 % water; palm oil pure fat
White chocolate ganache, Pamungkaningtyas et al. 2024
White chocolate couverture 1 % water, 35.8 % fat, 46 % sucrose, 9 % milk sugar, 6 % protein
Whipped cream Dairy cream assumed, as the study does not say: 35 % fat, 58.2 % water
Inverted sugar 81 % dry matter, half glucose and half fructose
Butter / carrageenan Butter 82 % fat, 16 % water; carrageenan 90 % fibre, 10 % water

The studies do not report these compositions; they are typical values.

The Milk’s Own Salts

Milk carries salts dissolved in its water: potassium, sodium, chloride, citrate and part of its calcium, magnesium and phosphate. Since November 2026 the calculator counts them in the water activity, as it already counted them in the freezing point of ice cream: about 0.0013 osmoles per gram of milk solids-not-fat, from their freezing-point depression (H. D. Goff, University of Guelph, after Leighton 1927). They lowered the milk and white ganaches here by 0.009 to 0.015 against the first version of this comparison, and the dark ones, through their cream, by about 0.003. At the finished moisture, the six milk and white compound ganaches moved from within 0.012 of the lab to between 0.002 above and 0.020 below it. The figure was set for ice-cream mixes, where the milk is dilute; in a ganache’s more concentrated water the salts may pair up and lower the water activity less, so the calculation counts them at their upper bound.

Where the Recipe and the Moisture Disagree

The dark filling’s 2:1, read as chocolate to cream, is 66.7 g of chocolate and 33.3 g of cream in every 100 g. That mix holds 20.4 % water, while the lab measured 31.7 %, and heating can only drive water out. Read the other way round, the mix would hold about 40 % water, which is too wet. The authors themselves explain the high moisture by “the higher cream content” of their filling. The comparison therefore uses the split that holds exactly the measured 31.7 % water: 47.7 g of chocolate to 52.3 g of cream.

With the typical compositions above, the recipes of the other two studies hold 22.0–23.6 % water against 16.6–20.9 % measured, so the calculation adds a drying step that takes each mix down to its measured moisture. If evaporation alone explained the difference, the nine compound ganaches, all heated the same way to 80 °C, would have lost between 2.0 and 8.1 g of water per 100 g, and the white chocolate ganache, warmed only to 45 °C, 7.4 g, about 36 % of its cream’s water. Ingredients holding less water than the typical values may explain part of it.

Ganache ratio guide

How the chocolate-to-cream ratio sets texture and water content across ganache uses.

Results by Study

Dark chocolate filling, Panda et al. 2022. Dark chocolate (Apamate 70 %, Chocolates El Rey) and cream with 33 % fat, stated as 2:1. Rotronic Hygropalm HP23-A at 20 ± 1 °C, five replicates; aw 0.92 ± 0.01 on the day it was made. The stated 2:1 holds too little water, so the chocolate-to-cream split is set to 47.7 : 52.3, which holds the measured moisture.
SampleLabCalculatedGap
Dark chocolate 70 %, cream 33 % lab moisture 31.7 % recipe as written: 0.892 at 20.4 % water 0.92 0.942 +0.022

Calculated: at the moisture the lab measured. Gap: calculated minus lab aw.

Panda A, Coelho P, Alvarenga NB, Lita da Silva J, Lampreia C, Santos MT, Pinto CA, Amaral RA, Saraiva JA, Dias J (2022). Effect of High Pressure on the Properties of Chocolate Fillings during Long-Term Storage. Foods 11(7):970. doi:10.3390/foods11070970. Licence: CC BY 4.0.

Compound chocolate ganaches, Fadzil et al. 2025. 49 % dark, milk or white compound chocolate, 35 % whipped cream, 9 % butter or palm oil, 7 % inverted sugar. Aqualab meter at about 25 °C, three replicates. The recipes hold more water than the lab measured, so the calculation adds a drying step down to the measured moisture.
SampleLabCalculatedGap
Dark compound, butter lab moisture 20.9 % recipe as written: 0.856 at 23.4 % water 0.7925 0.833 +0.040
Dark compound, 70 % palm oil lab moisture 19.8 % recipe as written: 0.850 at 22.4 % water 0.7989 0.823 +0.024
Dark compound, palm oil lab moisture 20.4 % recipe as written: 0.847 at 22.0 % water 0.7949 0.831 +0.036
Milk compound, butter lab moisture 18.8 % recipe as written: 0.852 at 23.5 % water 0.8172 0.808 −0.009
Milk compound, 70 % palm oil lab moisture 18.5 % recipe as written: 0.846 at 22.4 % water 0.8053 0.807 +0.002
Milk compound, palm oil lab moisture 17.8 % recipe as written: 0.843 at 22.0 % water 0.8131 0.799 −0.014
White compound, butter lab moisture 16.6 % recipe as written: 0.846 at 23.4 % water 0.7931 0.773 −0.020
White compound, 70 % palm oil lab moisture 19.3 % recipe as written: 0.840 at 22.4 % water 0.8169 0.811 −0.006
White compound, palm oil lab moisture 19.4 % recipe as written: 0.838 at 22.0 % water 0.8208 0.813 −0.008

Calculated: at the moisture the lab measured. Gap: calculated minus lab aw.

Mohamad Fadzil RA, Wan Ibadullah WZ, Abd Rahim FN, Badrul Zaman MM, Ishak I, Khaironi J, Mustapha NA, Ismail-Fitry MR, Shukri R, Zainal Abedin NH, Mahmud Ab Rashid NK (2025). Restructuring Palm Oil's Fat Structure to Replace Butter: Assessing Physicochemical, Composition, and Rheology Changes in Dark, Milk, and White Chocolate Ganache. Journal of Biochemistry, Microbiology and Biotechnology 13(1 SP1):1-5. doi:10.54987/jobimb.v13iSP1.1056. Licence: CC BY 4.0.

White chocolate ganache, Pamungkaningtyas et al. 2024. 49 % white chocolate couverture, 34.9 % whipped cream, 9 % unsalted butter, 7 % inverted sugar, 0.1 % carrageenan; the control without flower powder. Aqualab meter at 25 °C, three replicates; the study prints aw to two decimals, so the lab value carries ±0.005 from rounding alone. The recipe holds more water than the lab measured, so the calculation adds a drying step down to the measured moisture.
SampleLabCalculatedGap
White chocolate, butter lab moisture 17.5 % recipe as written: 0.859 at 23.6 % water 0.88 0.803 −0.077

Calculated: at the moisture the lab measured. Gap: calculated minus lab aw.

Pamungkaningtyas FH, Fandy SJ, Septiyanto JP (2024). The effect of butterfly pea (Clitoria ternatea L.) and roselle (Hibiscus sabdariffa L.) powder addition on the physicochemical and sensory properties of white chocolate ganache. IOP Conference Series: Earth and Environmental Science 1324:012107. doi:10.1088/1755-1315/1324/1/012107. Licence: CC BY 3.0.

Across all eleven, calculated at the measured moisture, the mean gap is −0.001 and the root-mean-square gap 0.031, with 8 samples within 0.025 of the lab; 5 read above the lab and 6 below it. From the recipes as written, the mean gap is +0.029 and the root-mean-square gap 0.040, with 3 samples within 0.025.

Why a Calculation and a Meter Can Disagree

The calculator starts from the recipe: how much water the mix holds and how strongly the dissolved sugars and other solids hold on to it. In a cream ganache, the sugar from the chocolate does most of the work; fat holds no water, so it changes the water percentage without lowering the aw. A hygrometer-type meter starts from the sample: it reads the relative humidity of the air sealed above it once the two are in equilibrium, so 92 % relative humidity is an aw of 0.92.

The calculation inherits every error in the recipe and the compositions it is given. The meter depends on calibration against reference salt standards, on the sample and the sensor sitting at the same temperature, and on time to reach equilibrium. Water activity also shifts with temperature, so readings compare only at the same temperature; these studies measured at 20 °C and at about 25 °C. A gap is the sum of both errors, and the first thing to check is whether the two describe the same filling.

What Eleven Samples Can and Cannot Show

The labs’ repeat readings were tight. The dark filling’s five replicates had a standard deviation of 0.01 on the day it was made, the compound ganaches’ triplicates agreed to the third decimal, and the white chocolate ganache’s value, printed to two decimals, carries ±0.005 from rounding alone. Over 12 months, the untreated dark filling kept at 20 °C stayed between 0.90 and 0.94, and across all seven storage conditions, including the high-pressure-treated and frozen samples, its readings ranged from 0.87 to 0.95. The gaps in this comparison are larger than the scatter between replicate readings.

The samples do not establish accuracy for other fillings. Couverture milk chocolate ganaches, shelf-stable fillings built on glucose syrup or sorbitol, and fruit or alcohol fillings lean on other parts of the model, and none of them is here yet; white couverture ganache has a single sample. Only more measured fillings can show whether the calculation runs consistently high or low for a type of ganache, as it ran high for the three dark compound ones, or scatters evenly around the lab values. A calculated number is not a compliance test.

Which Studies Are Included

This comparison includes only studies whose licence allows their data to be republished on a commercial site with a full citation: Creative Commons Attribution (CC BY), CC BY-SA or CC0. Other published ganache measurements exist under a non-commercial licence, a publisher’s licence or with all rights reserved, so their data is not shown. Of the three studies here, two are published under CC BY 4.0 and one under CC BY 3.0, and each results table names its study, DOI and licence. The recipes, processes, instruments and measured values are quoted from the studies. The ingredient compositions, the calculations and the comparisons are Formul.io’s, made with the ganache calculator in October 2026 and recalculated in November 2026, when it began to count the milk’s dissolved salts; the studies’ authors were not involved in them.

Calculated and Measured aw: Questions

How accurate is a calculated water activity for ganache?
In these eleven samples, calculated from the moisture the lab measured, eight land within 0.025 of the lab. From the recipes as written, the calculation reads 0.03 high on average. Eleven samples do not set an accuracy for every ganache.
Why does the calculation from the recipe read high?
With typical ingredients, most of these recipes hold more water than the labs measured in the finished ganache, and in the same recipe more water means a higher aw. The studies do not show whether the difference evaporated or the ingredients held less water than typical. For your own batch, weigh it after cooking and add a Dry step with the water percentage that is left.
Can I use a calculated aw instead of a lab test?
Use it to develop a filling and compare versions before you make them. For a shelf-life claim or a food-safety decision, measure the finished product on a calibrated meter and run a storage test.
Why were typical ingredient compositions used?
The studies name their ingredients but do not report their composition. For your own recipes, use your suppliers' specifications instead.